Ring Doorbell Blue Light Flashing

ring doorbell flashing blue

Table of Contents

Tips to Avoid Your Ring Doorbell Flashing Blue:

  • Check the power source

  • Check the Wi-Fi connection

  • Reset the device

  • Check for firmware updates

  • Contact customer support

Having trouble with your Ring doorbell flashing blue light? Don’t worry, We’re here to help!

In this article, we’ll go through the most common causes of a flashing blue light on your Ring doorbell and provide tips on how to fix it. We’ll also explain why it’s important to keep your Ring Doorbell up-to-date and how to contact Ring customer support if the issue persists. So if your Ring doorbell is giving you trouble, read on to find out what to do.

Understanding What the Flashing Blue light on a Ring Doorbell Means:

A Ring doorbell blinking blue light means something is wrong with your device. If the blue light on your Ring doorbell is a solid blue light, it means that the device is connected to the Wi-Fi network.

If it flashes blue light, this could mean that the device is either trying to connect to the network or the battery is low. If the Ring Doorbell is flashing blue light and ringing, it could indicate that the device needs to be reset.

To reset your Ring Doorbells, press and hold the setup button on the back of the device for 10 seconds. This should reset the device, and the blue light should stop flashing.

In some cases, the blue light on the Ring doorbell may indicate the device is not receiving enough power. This could be due to the power supply or low battery life. If the doorbell is powered by a transformer, try unplugging it, then plugging it back in. You might need to replace the battery if your doorbell has one.

Causes of Ring Doorbell Flashing Blue Light:

You can connect the Ring App to your doorbell, and a Ring Chime can alert users when the doorbell is pressed. However, if the doorbell loses power, the Ring App and Ring Chime will not be able to alert the user.

In this case, the doorbell will flash blue, indicating that there is an issue with the power source. The flashing blue light can also be because of a problem with the device’s settings or a malfunctioning component.

What To Do When the Blue Light on Your Ring Doorbell is Flashing?

When using the Ring Video Doorbell, a blue light pattern may be visible when you press the doorbell. This upward-moving blue light is a signal that the device is working correctly.

However, if the doorbell is flashing blue, it could indicate that the device is not receiving power, that there is an issue with the wiring or a problem with the device’s settings. In this case, it is important to check the user manual or online resources to determine the cause of the issue.

If these steps do not resolve the problem, it may be necessary to factory reset the device or contact Ring support for further assistance by Clicking Here.

Troubleshooting a Ring Doorbell with a Blue Light from Flashing:

When troubleshooting a Ring Doorbell with a flashing blue light, the first step is to check the power source. Ensure that the power source is connected and provides a stable power supply.

If the power source is working properly, then check the Wi-Fi connection. Ensure that the device is connected to a strong Wi-Fi network and that the signal is not disrupted. If the Wi-Fi connection is working, then check the doorbell button.

Make sure the button is functioning properly and does not show any damage of defectivity. If all of these are in working order and the blue light is still flashing, then the device may need to be rebooting blue light flashes, or the firmware update is necessary.

This could cause the device to enter into a boot loop, or the top half of the device may start flashing blue. If this occurs, it may be a sign that the blue light flashes and flashing blue light mean that you might need to restart the device.

Is There a Way to Stop the Blue Light Flashing on My Ring Doorbell?

Yes, there is a way to stop the top half flashing blue circle light on a Ring light doorbell. The best way to do this is to identify the cause of the flashing blue light and troubleshoot it accordingly.

If the issue is related to a power issue, you may need to reset the doorbell or replace the batteries. If the issue is a connection issue, you may need to reset the internet connection or reset the doorbell itself.

Identify Ring Doorbell Flashing Blue Light:

The Ring doorbell features a blue flashing light by pressing the setup button on the back of the device. Once you press the setup button, the blue light will start rapidly flashing blue, creating unique Blue light patterns such as spinning blue lights or blue flashes.

This indicates that the device is in the setup process and is attempting to connect to a Wi-Fi network. If the ring flashing blue light does not stop after a few minutes, it likely means that there is an issue with the connection.

There are several ways to prevent your Ring doorbell’s blue light from flashing:

1. CHECK THE POWER SOURCE. Make sure that you connect your Ring Doorbell to a reliable power source. Make sure it is charging properly if your Ring doorbell is hardwired.

2. ADJUST THE MOTION DETECTION SETTINGS. If the motion detection settings are set too sensitively, the blue light will flash more often. To reduce the amount of blue light, you can adjust the settings to reduce the sensitivity.

3. DISABLE NIGHT VISION. Blue light is used for night vision and can be disabled. Disabling night vision will prevent the Ring blue light from flashing.

4. ADD A PRIVACY SHIELD. You can also purchase a privacy shield to cover the blue light. This will prevent the light from flashing.

Benefits of Installing a Ring Doorbell

1. INCREASED SECURITY: A Ring Doorbell can help protect your home from unwanted visitors or intruders. It is equipped with a spinning blue light, circular light, and LED lights that flash when someone is at the door.

The Ring Doorbell Models also feature motion detection and video recording capabilities, giving you the assurance that you can monitor your home when you’re away.

2. CONVENIENCE: Being able to see and talk to people at your door from anywhere is a huge convenience. The Ring Device, such as the Ring Video Doorbell Pro, allows you to answer the door without having to get up or even let people in without having to be home.

3. HOME AUTOMATION CAPABILITIES: With the Ring Doorbell, you can connect it to other smart home devices such as lights, locks, and thermostats.

4. VIDEO RECORDING: The Ring Doorbell records video when someone is at your door and stores it on the cloud. It has a built-in battery and speaker, so you can hear and see who is at your door. You can adjust your camera’s motion sensitivity to have it record cars driving by as well. 

5. COST SAVINGS: The Ring Doorbell can help you save money on energy costs by connecting to your thermostat. With free test rings, you can also save money on security costs by providing an extra layer of protection for your home.


• 1080p HD Vide

• 2-way Audio with Noise Cancellation

• Night Vision

• Motion Detection with customizable zones

• Live View from anywhere with the Ring app

• Cloud Video Storage

• Compatible with Alexa and Google Assistant

• Easy Installation


Frequently Asked Questions:


Q: What does it mean when the blue light is flashing on my Ring doorbell?

The flashing blue light on a Ring doorbell indicates that the device is either in setup mode or is having difficulty connecting to the Wi-Fi network.

Q: How do I identify the cause of the blue light flashing?

The Ring doorbell flashes solid blue light can be identified by pressing the setup button on the back of the doorbell. Once the setup button is pressed, the blue light will start flashing.

Q: How do I resolve the issue when the blue light is flashing?

Depending on the cause of the issue, you can try resetting the doorbell or resetting the Wi-Fi or internet connection. If the issue persists, contact Ring customer service for assistance.

Q: Why is my Ring doorbell flashing red?

The flashing red light on your Ring doorbell could indicated a low battery, or in some cases red lights on ring indicate the camera is in infrared mode.


Identifying the cause of the light patterns flashing on a Ring doorbell is important in order to ensure that the device is functioning properly.

If the issue is related to a power issue, resetting the doorbell or replacing the batteries may be necessary. If the issue is related to a connection issue, resetting the Wi-Fi connection or resetting the Ring devices itself may be necessary.

If the issue persists, performing a few test rings or examining the doorbell speaker for any spinning white circle or spin blue may be helpful. If the issue still persists, contact Ring customer service for assistance.

Leave a Reply

Scroll to Top